Description

Product Parameters

Product Name: Multi-Function Massager

Model: SPK-911

Input Power: ≤10W

Battery Capacity: 2000mAh

Rated Current: 180mA

Input Voltage: 5V

Working Modes: 20 Modes, 30 Intensity Levels

Transportation and Storage Conditions

1) Ambient Temperature Range: -20 C to 55 C

2) Relative Humidity Range: <93%

3) After packaging, should be stored indoors in a well ventilated area free of corrosive odors.

Product Features

1) Waveform modes can be adjusted for different body parts.

2) Waveform and intensity can be customized to personal needs.

3) Uses a rechargeable lithium battery.

Charging Operation

1) Charging time is approximately 3-4 hours, input voltage 5V.

2) After the battery is depleted, please charge it as soon as possible. If not charged for an extended period, the battery may enter protection mode. When connected to a power source, the screen will illuminate after approximately 1 minute.

3) If the massager is not used for a long time, it must be fully charged once every month.

Product Usage Precautions

Safety Usage Guidelines

It is recommended to use the product on the same area for 10-20 minutes per session. When using on one area, pause every 3 minutes before continuing.

Usage Precautions

1.IF you experience any discomfort while using this product, stop use immediately.

2. Before use, ensure that no metal is in contact with the electrode pads of the massager.

3. Different body parts have varying impedance levels, which may affect intensity. When switching body areas during therapy, start at a low intensity and gradually adjust to a comfortable level.

4. After use, press the “ON/OFF” button to tum off the massager.

5. Before starting therapy, firmly attach the electrode pads to the desired treatment area before turning on the massager.

6) If the electrode pads need to be moved or repositioned during therapy, turn off the massager before adjusting

7) The massager must not be used simultaneously with high-frequency surgical equipment, short-wave, or microwave devices-

8) Do not use in environments with electromagnetic radiation.

9) Replace the electrode pads promptly if they lose adhesion.

10) The area where the electrode pads are applied must be clean and dust-free. Do not allow substances such as powder to remain on the skin surface, as this may reduce pad adhesion and cause them to detach easily.

Notes:
•Never use the machine together with the following medical appliances, such as pulse regulator, artificial cardiac pacemaker, and electrocardiograph machine.
•Don’t put the electrode pads onto the point or precordial region, carotid and the waist of pregnant woman.
•Seriously sick people should consult doctors before using this machine.
•It’s not allowed to dismantle, repair or rebuild the machine.
•Don’t touch the electrode pads with metal substance, such as strap, watch, necklace and etc when the machine is working.
•Don’t use the machine when you feel uncomfortable or skin irritation appears.
•Don’t use the machine under wet conditions, such as bathroom.

Included in this package:
• Tens Device x 1pcs
• Electrode pads x 8 pcs

• Manual x 1 pcs

8Pcs electrode Pads(4bag=4pairs = 8pcs)

Product Parameters:

Product Name: Multifunctional Massager

Output Power: 5 W

Battery Capacity: 2000mAh

Rated Current: 180mA

Output Voltage: 5V

Device Size:17.8×11.4×4.2cm

Working Mode: 15 Modes, 30 Levels of Intensity, 4 output channels

HOW TO USE

1. The electrode wire is connected to the electrode pad

2. Insert the electrode wire into the machine

3. Attach the electrode pad to the body

4. Select Power On

5. Press the A/B/C/D button to select the desired output port

If Port A is selected, connect the electrode wire to the A output port on the top of the device.

6. The default usage time is 20 minutes. To modify. the time, use the ‘T’’key. The maximum adjustable time is 30 minutes.

7.The default setting is high frequency (400-500 Hz). To adjust the jrequency, use the “F” key.High frequency: 400-500 Hz

8.Press the “M” key to choose the desired mode.Each output port can be independently controlled for mode selection.

9.After selecting the mode, adjust the output intensity using the “+” and “-” buttons.  The maximum intensity level is 30.

Adjust gradually until the massage feels comfortable.