Product Parameters

Product Name: Multi-Function Massager

Model: SPK-911

Input Power: ≤10W

Battery Capacity: 2000mAh

Rated Current: 180mA

Input Voltage: 5V

Working Modes: 20 Modes, 30 Intensity Levels

Product Features

1) Waveform modes can be adjusted for different body parts.

2) Waveform and intensity can be customized to personal needs.

3) Uses a rechargeable lithium battery.

Charging Operation

1) Charging time is approximately 3-4 hours, input voltage 5V.

2) After the battery is depleted, please charge it as soon as possible. If not charged for an extended period, the battery may enter protection mode. When connected to a power source, the screen will illuminate after approximately 1 minute.

3) If the massager is not used for a long time, it must be fully charged once every month.

Product Usage Precautions

Safety Usage Guidelines

It is recommended to use the product on the same area for 10-20 minutes per session. When using on one area, pause every 3 minutes before continuing.

Usage Precautions

1.IF you experience any discomfort while using this product, stop use immediately.

2. Before use, ensure that no metal is in contact with the electrode pads of the massager.

3. Different body parts have varying impedance levels, which may affect intensity. When switching body areas during therapy, start at a low intensity and gradually adjust to a comfortable level.

4. After use, press the “ON/OFF” button to tum off the massager.

5. Before starting therapy, firmly attach the electrode pads to the desired treatment area before turning on the massager.

6) If the electrode pads need to be moved or repositioned during therapy, turn off the massager before adjusting

7) The massager must not be used simultaneously with high-frequency surgical equipment, short-wave, or microwave devices-

8) Do not use in environments with electromagnetic radiation.

9) Replace the electrode pads promptly if they lose adhesion.

10) The area where the electrode pads are applied must be clean and dust-free. Do not allow substances such as powder to remain on the skin surface, as this may reduce pad adhesion and cause them to detach easily.